hue Switch Beacon 1.14


Free
  Continue to app


Publisher Description



hue meets beacon: Use Bluetooth LE beacons to switch your Philips hue lights
Without hue functionality app just shows the user which room he entered.
The hue functionality is only for experienced hue users, since it utilizes hue sensors and rules which have to be defined externally.
Given rules and sensors are set up, only 6 steps are needed:
1) Define rooms (+ icon and swipe to delete) and associate them to sensors and sensor values
2) Scan beacons (Bluetooth icon) you want to use
3) Adjust the min Rssi below which a beacon shouldn't be considered anymore.
This is for fine tuning, in case the beacon signal can be read outside the defined room.
4) Associate beacons to rooms (click on list item when not scanning)
5) Register app (bridge icon) at the bridge and enable hue in preferences
6) Press start (play icon)
hue sensor type used: CLIPGenericStatus
In debug mode a log is shown on the screen.
Refresh icon reloades hue bridge IP.
Permissions:
BLUETOOTH: Necessary for scanning for BT devices
INTERNET: Necessary for contacting hue bridge und upnp for getting hue bridge IP
RECEIVE_BOOT_COMPLETED: Necessary when option start scanning on boot is used
ACCESS_COARSE_LOCATION: Necessary to be able to receive beacon address
ACCESS_WIFI_STATE: Necessary to get informed when home wifi network is in reach
CHANGE_WIFI_STATE: Necessary to be able to scan for wifi networks in preferences dialog
Location Service must have been turned on in Settings/Location in order to be able to scan BT devices.
In order to optimize battery usage two features are implemented:
1) A home wifi network can be selected. Only when connected to this wifi hueSwitchBeacon scans for beacons
2) Sensors are used (step or gravity) to recognize that phone moved / is stationary. If phone is stationary
scan is stopped temporarily until movement is recognized again.
The scan can always be stopped by opening the app and pushing stop button on beacon page.
hueSwitch Beacon is tested on Nexus 4 (Lollipop) and Nexus 5X (Marshmallow).
It should work on 4.3 devices as well, but this is not tested (feedback appreciated)
Have fun with the location aware hue switch...

Download Information



We do not host hue Switch Beacon 1.14 on our servers, so we did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google Play and passed their terms and conditions to be listed, however we still recommend caution when installing it.

Disclaimer



soft112.com lists download links hosted by Google Play, so if you have a question regarding a particular software contact the publisher directly. The download links for hue Switch Beacon 1.14 are provided to you by soft112.com without any warranties, representations or guarantees of any kind, so download it at your own risk.





Add a review


Tell us your experience with hue Switch Beacon 1.14


RELATED PROGRAMS
Our Recommendations






BarCode2D-PNG




Click stars to rate this APP!

Users Rating:  
  0.0/5     0
Editor Rating:  
  0/5
Downloads last week: 0
Release Date: 2016-01-18
Publisher: DadOfFAK
Operating System: android
Type: Free